Shop headings: New Spares | Used Spares | Accessories | Brands
Dellorto choke plunger return spring for models with Dellorto VHB 30, PHF 30 and PHF 36 carbs
More than 5 in stock
13937600 GU13937600 13 93 76 00
1393 7600 1393.7600 13.93.76.00
£1.70
INC VAT
£1.42 EX VAT
Gearbox end cover gasket for 5 speed models
More than 5 in stock
14201110 GU14201110 14 20 11 10
1420 1110 1420.1110 14.20.11.10
£2.80
INC VAT
£2.33 EX VAT
Clutch adjustment locknut for gearbox rear, locks adjustment of freeplay on clutch arm. Also used as tappet adjuster nut on early 750 and Nuovo Falcone models
Also known as Guzzi ref. 92606508
More than 5 in stock
92602508 GU92602508 92 60 25 08
9260 2508 9260.2508 92.60.25.08
£0.90
INC VAT
£0.75 EX VAT
UFI 30 814 00 flat type air filter, paper filament in rubber surround
NB Packaging may vary
More than 5 in stock
28113650 GU28113650 28 11 36 50
2811 3650 2811.3650 28.11.36.50
£8.00
INC VAT
£6.67 EX VAT
A2 stainless socket cap screw M5 x 45, used for retaining Bosch alternator stator
More than 5 in stock
98620245 GU98620245 98 62 02 45
9862 0245 9862.0245 98.62.02.45
£1.20
INC VAT
£1.00 EX VAT
Plastic plug / cover for M10 hex head bolts
Also used as a nut cover
More than 5 in stock
14498550 GU14498550 14 49 85 50
1449 8550 1449.8550 14.49.85.50
Sorry this item is out of production
Replacement blue LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002
These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED
More than 5 in stock
£3.40
INC VAT
£2.83 EX VAT
High tensile M8 socket cap head bolt used to bolt RAM clutch to the crank, this is the only type of bolt that will work in this application
6 bolts required
More than 5 in stock
£0.90
INC VAT
£0.75 EX VAT
Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£18.00
INC VAT
£15.00 EX VAT
Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe
Use hose clip FUA00004
More than 5 in stock
£7.00
INC VAT
£5.83 EX VAT